Removing debris from tall structures and high-rise buildings safely, efficiently and cost-effectively is quite challenging. While metal dumpsters may be suited to getting rid of walk out debris on construction sites, they are way too heavy, cumbersome and bulky to be hoisted on rooftops or even to clear debris located several stories above ground.
Using chutes to slide debris into a dumpster is not the ideal solution either for all reasons. First, maintaining chutes in good working order is labor-intensive and requires frequent repairs due to the friction, tearing, and damage that sharp objects and abrasive materials commonly present in industrial debris can cause to the chute fabric while they slide down. In addition, dumping debris down a chute from an elevation generates plenty of airborne particles, dust and pollution that might present a significant health hazard to workers and the typical public.
Fortunately, you can find new special debris removal dumpster bags in the marketplace which can be perfectly suited to this task and are well suited for the roofing and construction industry. These lightweight dumpster bags weigh under 10 lbs and measure roughly 36″ in width, length and height respectively. They’re frame-less, self-standing and unlike other flexible dumpsters and traditional metal containers available in the marketplace, they are so light and compact, that they can easily be deployed by one individual in less than five full minutes on any rooftop, even on the tallest high rise buildings.
Despite their compact size, these reusable FIBCs (Flexible Intermediate Bulk Containers) can haul amazing quantities of debris from roof tops over and once again without falling apart. With a loading capacity of 2,200 lbs and a volume capacity of 27 cubic feet, they are able to hold virtually almost any abrasive or sharp material generated on a development site, odvoz odpadu including jumbo sized debris such as broken glass, torn metal, splintered wood, sheet-rock, cement chunks and much more. Since they’re produced from woven polypropylene, these dumpster bags are rip resistant and will not burst open even when the bags are punctured while being lowered to the bottom by crane or while suspended in mid air. The straps that support these specialized FIBC bags are even tougher. They are created to withstand 6,000 lbs of pressure and are manufactured from exactly the same type of nylon material employed by car manufacturers for seat belts.
In addition, these special FIBC bags are equipped with a secure and easy to use dump bottom mechanism. Thus giving them a significant edge with regards to discharge rate. Once a case is filled up with debris and lowered to walk out, its contents can be quickly emptied right into a traditional dumpster or perhaps a truck by releasing several straps. This forces the bottom of the bag to spread available and the contents to spill out while the crane lifts the bag back around the rooftop for another load.
These bags are fully customizable. Upon request producer can modify them to suit a customer’s specific needs. This includes altering how big bags in addition to the amount of straps for added support. Obviously, the bags are not just helpful for removing debris from rooftops. They’re also perfectly suited to removing debris at walk out, on steep inclines as well as below ground.
The maker of the specialized debris removal bags is currently supplying a free sample bag with the purchase of three or even more bags, so if you’re starting a brand new construction, remodeling or renovation project and you need a cost-effective alternative to traditional metal dumpsters take full advantage of these free sample and compare how fast and efficiently you are able to clear debris from a website with these new and improved flexible dumpster bags.