As is the case with automobile and home lighting systems, LED lighting systems for saltwater aquariums have grown to be extremely popular among aquarists over the last few years. These systems possess some excellent points to them, especially if you buy quality light strip. But additionally there are some issues to be aware of when using LED lighting in your aquarium.
The Benefits of LED Lighting for Aquariums
LED lighting systems are less expensive in two ways. First, an LED bulb provides seven to eight times more wattage per bulb than other forms of aquarium lighting, such as for instance halide and T5HO bulbs. What this means is that you will get exactly the same level of light from the 30 watt LED bulb as you might find from the 250 watt halide bulb. This could produce a significant savings on your monthly electric bill. Second, LEDs can last up to 50,000 hours. Although you spend more initially for the LED bulb, you might not have to replace it for seven years, as weighed against the yearly cost of replacement of a T5HO or halide bulb. The LED aquarium lighting system packs every one of these savings in to a small space, because LED systems are scaled-down than other aquarium lighting.
The quality of the LED lighting is also a great reason to invest in this system. LED aquarium lighting can deliver up to 10,000K of lighting, which will be enough to stimulate growth in corals and aquarium plants. Also, you have a wide variety of choices in colors with an LED system LED Linear Lighting. When this is along with computer programming, it can create an aquarium that either shimmers want it is located in the ocean, or the lighting accentuates the colors of the fish and corals for a fantastic show.
What things to Try to find in an LED Aquarium Light
Taking care of of a good LED aquarium lighting system to consider is whether or not it has ways to cool itself off to be able to extend living of the LED bulbs. This cooling can either be passive or active. The Maxspect Razor R420R uses an aerodynamic design to naturally draw cooler air from beneath the device and through the slim body of the fixture to passively cool the lights. In the event of the Ecotech Marine XR30w Pro Gen3 model, a supporter is created into the center of the light strip to offer necessary cooling for the LEDs.
Another item to consider whenever choosing an LED light fixture is the spectrum selection of the lights. You want your system to offer the entire light spectrum your plants, animals, and corals need to be able to thrive like they certainly were inside their natural habitat. In the event of the AquaIllumination AI Hydra FiftyTwo LED System, your aquarium organisms can receive a full spectral range of light that’s more than visible light. If you feel that could be somewhat much for the setup, AquaIllumination also makes an AI Hydra TwentySix LED system, which has half the bulbs of the FiftyTwo model, but nevertheless uses 80 degree lenses to spread the light to best advantage, as well as providing 90 percent LED optical efficiency.
Things to Avoid When Using LED Aquarium Lights
There are always a few things you will need to be aware of before establishing your own LED lighting in your aquarium. Heat is one item. Although LED lights don’t release nearly just as much heat into an aquarium system as metal halides or T5HO bulbs do, they’re vunerable to reduced lifespan in the current presence of heat. Therefore, LEDs should not be utilized close to halides, fluorescent, or T5HO bulbs, because of the exposure to heat.
Don’t get your LED system wet. Although aquarium LED systems are water resistant, they can’t take being dropped to the aquarium. The end result is likely to be corrosion and shorting of the circuit board. Additionally you need to control the mineral deposits that will develop on LED light systems for exactly the same reason. Marine aquarium salts can corrode your light system, unless the salts are cleaned off regularly.
Finally, you will need to introduce LED lights slowly to coral reef aquariums. These lights could be intensely bright. If bright LEDs are introduced too soon, corals will often react to the change by expelling their zooxanthellae, leaving behind a bleached coral without sign of life.