LED Strip Lights offer numerous advantages over more traditional luminaires, such as for example incandescent, halogen and fluorescent. Many of these are intrinsic to LED-technology in general, like a longer endurance, while others are unique to LED Strips, such as for example flexibility. This short article will outline a number of the advantages offered by these new generation strip lights.
Like all LED-technology, LED Strip Lights use significantly less electricity inside their operation. A typical meter strip of LEDs uses about 7.2 watts in power, which calculates to about 90% more efficient than other kinds of lighting. This makes them incredibly affordable to perform and allows users to try out much bigger installations with no fear of running up excessive utility bills.
LEDs have the ability to recreate a much wider array of colours than traditional kinds of lighting, making them especially worthy of effects light installations LED Linear Lighting. As well as the standard warm white and cool white, which are used for ambience, LEDs can also develop a wide spectral range of traditional colours.
LEDs have a endurance that far exceeds that of traditional luminaires. A typical Strip Light lasts as much as 70,000 hours.
Traditional luminaires are generally housed inside glass enclosures, which are fragile and inflexible. In contrast, the LEDs on strip lights are mounted to a flexible “ribbon” of circuit board which is often bent around 90 degree corners and be produced to suit to surfaces with a changing gradient.
These lights are often considered a “linear” light source, because of the lengthy, thin design. This permits them to be fitted in locations that a lot of other kinds of lighting can’t. Under kitchen cabinets, alcoves, shelves, bookcases; you name it, strip lights can get it done!
Halogen and incandescent light bulbs are notorious for becoming scorching during use. LED Strips on one other hand produce comparatively little heat, making them much safer to use and less of a fire hazard.
Mounting Strip Lights is surprisingly easy and requires almost no expertise. Most strips have a 3M self-adhesive backing, allowing them to be stuck along onto an area without the need for mounts or brackets. Even if they don’t really have a self-adhesive backing, installing brackets continues to be quite easy and less hassle than installation a fluorescent tube, for example.
LED Strip Lights are one of the few kinds of lighting available which can be cut. They feature cutting points all along their length, which is often used to shorten or separate strips. Non-solder connections can be used for easy re-connection, or you are able to ask your retailer to complete the task for you.